- 0
why a refill machine needed ?
MIS ink cartridge refill machines is designed to work with a technique called "Vacuum Filling". This technique is actually used in the OEM factories. When talk to people, it is common to hear the following comments;
- "I have refilled my ink cartridge, but it doesn't print like the original one"
- "My refill cartridge does not last like the original one"
- "My cartridge stopped printing after 5 sheets"
- "My cartridge prints with lines as if it were an empty cartridge"
- "I refilled my cartridge, but it dripped some ink before I install the cartridge to the printer"
- "I refilled my cartridge, but it dripped and broke down my printer"
- "I refilled my cartridge, but it hasn't printed, yet"
These are the outcomes of using an incorrect technique in refilling ink cartridges. For a better understanding, we outline two different refill techniques and their comparison below with short movie clips.
Refilling by Syringe
When we refill an ink cartridge by syringe, it starts to spread out from the edge of the refill needle. Due to the existing air inside the sponge, ink cannot follow a regular path. Later on, as we start to print with the cartridge, we come up with another problem. Because air is lighter than the ink, it situates under ink molecules. Therefore, it blocks the ink and situates between the nozzle plate and sponge. This is the reason why a cartridge stops printing after several print outs.
Furthermore, due to the existing air, the ink starts to go over the sponge. And this results in unbalanced air pressure inside the cartridge and leads to ink dripping eventually.
Watch the Video
Refilling with MIS Machines
On the other hand, MIS ink cartridge refill machines utilizes an approved technique in refilling. Prior to refilling the cartridge, it first removes the existing air inside the sponge under vacuum. In other words, in an isolated environment, we take the air out. And therefore, there happens a physical gap. And, we fill this physical gap by transferring the ink.
The result is;
1. Ink spreads throughout the sponge. It starts to spread from the print head to upwards.
2. There is left no air bubbles. So, the risk of post refilling problems is eliminated before they take place.
3. There happens no foaming, no ink dripping, no ink contamination, and no cease printing after several print outs.
4. Because the air pressure balance is maintained, the cartridge becomes ready for printing just after refilling. This process is also called as "priming the print head".
Watch the Video
Comparison of Refill Techniques
After we explain the refilling techniques, we can go ahead with the comparison in between. In our video, you will see that MIS ink refill machine literally cloned the cartridge and filled the ink successfully.
Ink has spread throughout the sponge starting from the print head to upwards. Additionally, there is no blank space inside the area filled by the ink. This means that the cartridge will print without any problem till it runs out of ink.
Watch the Video
Why not follow us on...
 |
 |
 |
Partner Sites
Please also visit our corporate website to see the entire range of products. Besides the ink cartridge refill machines, we also produce toner workstations, print cartridge boxes, transport and protection clips, cartridge labels, etc.
You can also read the latest news, events from our company, and new products at our blog. Do not forget to subscribe to our posts by filling the form.